|
|
Aluminum Anodizing
Materials
Specialty
products for aluminum anodizing
- Q.C.S. Dymo Clean NS 2800
Aluminum Cleaner cleans aluminum surfaces
without etching. Excellent for use prior to
anodizing. Will not dull brightly buffed aluminum.
Contains no caustic. Can be used with hard water.
- Q.C.S. Dymo Alum Etch 2805
Aluminum
Etchant produces a fine-grained etch, very
suitable for subsequent Anodizing. Fast etch time, 4
minutes or less, on most aluminum alloys. Will not scale
tank walls or develop tank bottom sludge.
- Q.C.S. Dymo Deoxidizer PNC
Powder
is a non-chromated deoxidizer designed for
aluminum prior to anodizing. Operates at ambient
temperature. Freely soluble in water. Contains fluorides
but no chromates. Can be used on both bare and clad
material. Produces a low surface contact resistance.
Economical. One pound will treat up to 800 sq. ft. of
aluminum.
- Specialty 982 Deox
Liquid
Non-Chromated Deoxidizer is designed to
deoxidize and desmut aluminum alloys including 2000 &
6000 series alloys prior to anodizing. Operates at
ambient temperature. Absence of chromium greatly reduces
waste disposal costs.
- APS SLC787
Complete
Spectrum Plus System Additive is super liquid additive
concentrate for smut-free Type II and Type III anodizing
performed in same tank. Achieves hardness not achieved
by competitive products with improved power
efficiencies. Meets military and aerospace
specifications. A unique process which will save time
and space for those who want to process Type II and III.
- LT Color-AD
Two-Step
Electro-Coloring Additive is designed for
electro-coloring architectural anodic coatings.
Minimizes tin oxidation in the two-step coloring bath.
Provides great increased throwing power while reducing
the amount of tin consumed. Operates at about two-thirds
of the tin concentration of conventional two-step
processes.
- NF Alumseal 101
Low-Temperature Seal for Anodic Coatings
is an
unbelievable one-step immersion sealing compound
specially designed for clear, inorganic gold dyed,
integral colored or electro-colored anodic coatings in
architectural finishes.
- NA Alumseal 201 Plus
Mid-Temperature Seal for Anodic Coatings
is a
highly effective one-step immersion sealing liquid
compound specially designed for organic dyed anodic
coatings. Its powerful sealing ability provides improved
corrosion and abrasion resistance. Meets or exceed all
applicable requirements of Military and Federal
Specifications.
- Aluminum Dyes for
Coloring Anodic Coatings on Aluminum. Large
variety of dye colors available: bordeauxs, reds,
oranges, golds, yellows, violets, greens, blues,
turquoises, grays and blacks.
- Tolber Chemical Division
Maskants,
Stop-Off Lacquers, Plastisols, Layout Dye, Masking
Waxes, Masking Tapes. Includes low VOC and
VOC-free lacquers, microtapes, vinyl plastisols. Wide
variety of tapes: yellow PVC, aluminum, lead, and
powder-coating tapes. Discs, dots, squares & rectangles.
Silicone high-temperature & neoprene tubing, cords, pull
plugs, coating discs, flange plugs, Caps, corks &
stoppers.
|
|
